1 choice of materials & mix
The raw materials are strictly screened, and after removing the impurities, they are sent to a professional mixing stirrer.
2 molding
Proportioning and mixing of good material into the large molding machine.
3 vacuum die casting
Using vacuum pumping technology, the formed billet is accurately controlled by the computer in the vacuum die casting machine. The vacuum equipment installed in the underground discharges the atmosphere in the seam to a close vacuum, causing ore, ore, and other additives. The most tightly packed, to ensure that each sheet is fine and non-porous.
4 heat curing
The plates coming out of the vacuum die casting machine are directly sent to a high temperature facility at 90-110°C for baking, heating, and curing for 50-120 minutes, so that the hardness of the plate reaches the maximum.
5 set the thickness
The thickness and thickness of the plate blanks are adjusted by the constant thickness equipment to stop the accurate adjustment. After the forming, they are directly placed on the belt conveyor belt and only one plate is formed at a time.
6 polishing
After the sheet is formed, it will be strictly calibrated by the machine again. On the automatic roller conveyor line, the slab is slowly transported, through 36 large and special heads, high-speed moving shells and uniform front and rear speed activities, supplemented by a large number of The cooling water and differential abrasives are polished to a special mirror effect.
7 quality inspection & anti-counterfeiting
Plates undergo stringent machine inspections and manual inspections to ensure they meet stringent product quality standards. Plates that meet the standards will be labeled with product labels, indicating the product model, specifications, batch, production date and other information. At the same time, the back of each sheet will be printed with anti-counterfeiting barcodes.
