Quartz stone is an environmentally friendly building decoration stone. Everyone is familiar with it. At present, quartz stone is widely used in cabinet countertops, test benches and window sills. It has to be said that the countertop surface seems to be synonymous with quartz stone. Many people will say that quartz stone is exclusive to the countertop. This is not true. Quartz stone was originally applied to countertops because of the limited production technology and capacity of domestic quartz stone manufacturers, most of which rely on imports, resulting in high price of quartz stone, so that ordinary income families can only choose to use on cabinets with higher requirements for countertops.
With the improvement of the production technology and capacity of quartz stone manufacturers in China, quartz stone has been widely used in the overall home decoration. Due to the extremely low water absorption rate of quartz stone, it is difficult to paste the surface. When it is bonded with traditional cement mortar, if it is improperly treated, it will easily appear water spots and discoloration, resulting in more empty drums, cracking, falling off, drums, etc. than natural stone. Various problems.
Quartz stone is used more and more in the ground, in order to avoid the appearance of various undesirable phenomena, the choice of materials is particularly important. The thickness of quartz stone should be more than 20mm. It should be used on the ground with quartz stone manufacturers when purchasing, because the formula of quartz stone floor tiles is different from other application fields. The binder should be discarded using traditional cement paste, and special rubber powder should be used. Since the surface of the quartz stone is smooth, it must be separated from the binder at a later stage, and the backing should be brushed before being laid.
1. The rubber powder is stirred. The ratio of rubber powder to water should be 1 part water and 4 parts dry powder. The ratio of powder to water can be changed according to the construction habits to adjust the consistency. Stir well with no powder in a low speed (300r/min) electric mixer.
2. adhesive, the board is brushed 2 hours before use, the adhesive should be completely transparent before use.
3. paving, confirm that the base surface has no clear water and no dust, scraping quartz stone adhesive (bar shape / full scraping) thickness of 7mm-15mm or more, the same method of stone back, thickness of 2-3mm, and then paste quartz stone, use The rubber crucible is gently tapped so that the new quartz stone can be completely adhered to the adhesive. Then correct the joint between the level and the adjacent plate, pay attention to the joint between the stone should be reserved 3mm or more.
